Specifications
* Length: 124-133 mm * Width: 65-76 mm, Height: 35 mm *) trace (v & h: 56,5-63,0 mm * Wheelbase: 86-106 mm; tire (v): Ø25x8 , 5 mm; tire (h): Ø25x8, 5 / 11 mm Weight: 135 g Motor: 130s; RC system: 2.4GHz ASF * The technical data refer to the chassis without a body! Since the chassis is variable in length, width and tire, are given for some of the data minimum and maximum values.

Description
The MR-03 chassis heralds a new era in the era of the Mini-Z Racer. Objective was to develop a chassis on the one hand, which gives an even greater driving dynamics and comes up with maximal performance. Second, the chassis should be flexible so that it can absorb all the previous bodies of MR 015 and MR-02-series. This allows almost all the recent body of the Mini-Z Racer MR-03 on the chassis attached easily.

The MR-03 chassis is designed to compromise racing performance. It is considerably narrower than the MR-02-predecessor and has a much lower center of gravity. This results in significantly higher cornering speeds and a very agile handling. The newly developed chassis Front wheel alignment gives the maximum mechanical grip and a perfect traction in all driving situations.

The Mini-Z MR-03-Racers will be equipped with an innovative 2.4 GHz wireless technology. It scans the remote control when you turn the whole band and automatically selects a free channel. Thus, the denials of the frequencies Deleted among the drivers. A total of up to 40 models can be operated simultaneously. In this new system, no more crystals are used. The frequencies are generated by a PLL synthesizer.

With the new transmission and all the electronics in the MR-03 has been revised. The new processor runs faster and gives the MR-03 in conjunction with the HiSpeed FETs an ultra-fast response. The delivery of the MR-03-racer takes place without the 2.4 GHz transmitter. For the operation of the models is the Kyosho Perfex KT-18 transmitter, No. 82,001 required.

Be at the 2.4 GHz receiver control unit RA-22 can be optionally connected to the piezo gyros DNW-107 to increase the stability of the model. The piezo gyros registered vehicle movement around the vertical axis (breaking out of the vehicle), long before they are visible to the human eye, and controls in a split second it.

At the front sits a high-resolution digital servo, which transmits the steering input at the transmitter in a split second on the wheels. The servo has a Coreless servo motor, the gear ratios in the servo is 94,41:1.

The front wheels are independently mounted and fitted with spring-loaded, double wishbone suspension. The high-grip low profile give the MR-03-racer uncompromising traction. In conjunction with the extremely low center of gravity a breathtaking driving dynamics is obtained, the models at this scale has never been achieved before.

The Board of MR-03-racer already comes as standard with the ICS interface. With a special USB cable and software (not can) included with the chassis can be configured on a computer. The setup data of the vehicle can be easily stored on the hard disk.

The rear of the MR-03 chassis is based on proven MR-02-components. Due to the suspension Powerpod the chassis is very flexible and adapts to any road situation at best. The propulsion batteries are adjacent in the model, which is the center of gravity very low.

Features
• MR-03 Mini-Z Racer with efficient Heckradantrieb
• Mainboard with an innovative 2.4 GHz wireless technology
• Designed for the inclusion of nearly all MR 015 and MR-02 body
• New Vorderachslayout with spring-mounted, double wishbone suspension
• High-resolution digital steering servo with Coreless motor
• ICS interface for connection to laptop
• rear axle as torsionsgefedertes Powerpod
• Operations are conducted without a conventional quartz
• Sophisticated Front wheel alignment with a lot of mechanical grip and direct steering behavior
• High-resolution digital steering servo
• Up to 40 vehicles can be operated simultaneously
• Huge range of tuning parts and car bodies
• bevel differential at the rear
• High-grip low profile
• Extremely low center of gravity
• Fahrfertig structured chassis without transmitter

Required Accessories
• 4 pcs Team Orion 900mAh AAA batteries HV, Order No. ORI13202 (model)
• 4 pcs Team Orion 1100mAh RT AAA batteries, Order No. ORI13201 (transmitter)
• Perfex KT-18 2.4 GHz transmitter, No. 82001
• Charger EZ Pro-Am Digital 12/230V, Order No. ORI30402
• Matching Mini-Z Body

Audience
Beginners, pros & Ambitious Racer