G-Made

1/10 GS02 BOM TRAIL TRUCK KIT

This is the assembly kit for the GS02 1/10 BOM Trail truck from G-Made

More details

G-Made

GMA57000

In stock at the supplier In stock at our supplier. Shipment in +/- 15 days, without warranty.

 Shippingcosts from 4.99€
or collect for free at the shop. .

339,99 €


Notify me when available

More info

  • 1:10th scale
  • TTR transmission
  • Front weight balance
  • 4 wheel drive
  • CMS System
    Rear cantilever suspension System
    Shown with custom painted body. Included body is<clear.

STEEL LADDER FRAME
GS02 trame is designed to look as a châssis of a real car trame and the material of the trame is made of high strength Steel, C-channel side rail and is with hex wrench bolted with cross members, which make it résistant to twisting or wraping.
Also, Steel parts are black powder coated finish to prevent rust.

ADJUSTABLE WHEELBASE
GS02 châssis allows three type of easy adjustment of wheelbase convert kit to use any type of 287, 313, 324 and 336mm custom bodies. (optional link kits are sold separately)

FRONT WEIGHT BALANCE
BOM's weight balance designed to be placed on theforward of the car.
This will increase the tire tracktionto the front wheelto provide bettercrawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing thevehicle's rolling over when climbing.

CHASSIS MOUNTED SERVO SYSTEM WITH Panhard bar
BOM's steering System has a steering servo on the frame just like a 1:1 real car.
It is designed to make it as closed to the zéro bump steer so bump steer movement does not
appear by front wheel suspension movements,
so we ended up with maximizing the steering performance of the vehicle.
In addition, the Panhard-bar is designed to avoid interférence with nearby parts, so thatthe front suspension and shocks can move freely without any loss

BATTERY TRAY
The battery can be easily replaced and can accom-modate up to 7,600mAh 2-cell Lipo batteries or 5,000mAh 3-cell Lipo batteries. (7,600mAh 2-cell LiPo or 5,000mAh 3-cell LiPo)

DUST PROOF ELECTRONICS BOX
It protects electronic equipments such as winch controllers and BEC, which are often used for scale trucks, from foreign substances

SKID PLATE
The skid plate protects the transmission and other critical compo-nents by the fiat surface that allows the BOM to slip and ride on rocks and other obstacles easily.

DRIVELINES
The drive lines of the front and rear axles are arranged in straight-line to reduce the fatigue stress of the universal shaft and reduce the loss of driving power by providing efficient driv-ing lines

TORQUE TWIST REDUCE TRANSMISSION
The TTR transmission is designed to drive in a stable position without pulling the balance of power transmitted to the axle.
The front and rear universal shafts based on the transmitter each rotâtes clockwise and counterclockwise, this compensâtes for the forces acting on the opposite rotational forces due to the action(torque) and reaction(reverse torque) because of that this vehicle can run in a super stable conditions.

DUAL SLIPPER CLUTCH
The slipper pads are designed to hold the spur gears evenly to allow more précisé setting.

ALL METAL INTERNAL GEARS

HARDENED CARBON STEEL UNIVERSAL JOINTS
The front and rear universal shaftsofthe Steel joints provides smooth and stable power train. The kit also includes the spare parts that allows you to adjustthe length of the universal shaft.

EASY ADJUST MOTOR MOUNT
You can easily replace and install the motor pinion gear to changing the gear ratio.

GA44AXLE
GA44 axle is designed with the hardcore rock crawler in mind.
Axles are made of high-strength meterials, and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
The GA44 axle housing is a durable one-piece type.
The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.

SD SCALER SHOCK ABSORBER
SD Scaler Shock is a Coil-over styled oil shock absorber optimized for the scale trucks.
The oil filled inside the shock minimizes splash when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive roughly on rough surfaces.
Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.

REAR CANTILEVER SUSPENSION SYSTEM
The GS02 rear cantilever suspension System is designed for efficiently use of custom fiat beds, full drop beds and the interiors.
It also provides smooth motion of the shock and big wheel travel.

REAR SHOCK RELOCATION KIT(select setup rear suspension)
Extra parts are included in the kit so that you can change the different types of shock mount positions.

BOM LEXAN BODY
The BOM body is made of high quality Lexan, which impact-resis-tant and it's very detailed.
Includes Front Grill, Light Buckets, Side Mirrors, Door Handles, and rear cage to add body details, allowing to tune in realistic off-road trucks.
The accessory parts are made of high-strength plastic so they are résistant to impact and contain real detailing decals.

REAR CAGE & REAR CAGE HINGE
The three-dimensionally connected rear cage structure effectively counteracts external impacts and the dustproof electronic box protects various electronic equipment from foreign objects.
Also, the rear cage is designed as a hinge type so that the connected body can be easily attached and detached from the châssis.

Specifications

  • Width ; 240mm
  • Height : 226mm
  • Length : 515mm
  • Wheel base : 313mm
  • Ground clearance : 79mm
  • Weight (no electronics) : 1.9kg

Data sheet

  • Manufacturer : G-Made
  • Scale : 1/10
  • Type : To build

1/10 GS02 BOM TRAIL TRUCK KIT

339,99 €

MCM undertakes

Deliver within 24/48h

To send your order within 24h (on working days) (according to the limit of the available stock) & to deliver within 24/48h.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at + 32 2 376 24 05 (No. non-premium rate) from 10:00 to 18:30 or by email.

A few figures
  • A store of 400m² located south of Brussels.
  • 23 years of experience.
  • + 110 000 products ref.
  • + 35 500 products in stock.
  • + 240 distributed brands.

Secure paiments

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal CBC KBC ING Belfius Sofort PayPal Bankwire

All your paiements are 100% secured.

Shipping

MCM Pickup Bpost DPD Pickup DPD Predict DPD Saturday

Free DPD Pick-Up delivery from 99 eur

Our stores

  • MCM Racing - MCM Skyshop

     Space:
    Showroom 400M2
     Hours:
    10:00-18:30
     Creation date:
    Since 1996
     Phone:
    +32(0)2 376 2405
     

MCM Group, the R/C specialist since 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine