Blade

Fusion 360 BNF Basic

Expert Expert

The Blade Fusion 360 is the next generation of the Fusion heli series. With the popular 360 size, Blade has taken a fresh approach in redeveloping the Fusion 360 for improved performance by adding high-end hardware and a new flybarless controller.

More details

Blade

BLH5250

In stock at the supplier In stock at our supplier. Shipment in 5 to 7 days, without warranty.

 Shippingcosts from 4.99€
or collect for free at the shop. .

579,99 €


Notify me when available

More info

Expanding on the Fusion line of helicopters, the Blade® Fusion™ 360 redefines BNF performance in a 300-sized machine. With the popular 360 size, Blade has taken a fresh approach in redeveloping the Fusion 360 by adding high-end hardware, all carbon fiber and aluminum construction, improved power system package, and more.

Cutting-edge Spektrum™ technology is featured throughout this beast from new Spektrum 3055 & 3065 servos with Optimized Servo Geometry to the new ground-breaking Spektrum 6250 HX flybarless system. This new flybarless controller features advanced adaptive flight control algorithms, forward programming, 6-axis M.E.M.S. inertial sensor, low-latency high-speed operation, two remote receiver ports for diversity, and a vibration rejecting aluminum lower case.

Pre-installed and pre-programmed in the Fusion 360 is a HobbyWing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive headspeeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The new all carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. The new carbon fiber main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminum tail case improving vibration damping and performance. All this combines to give pilots one of the best flying Blade models to date!

6S Power House

Pre-installed and pre-programmed in the Fusion 360 is a HobbyWing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive head speeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The heli also accepts a wide range of 22.2v 6S Lipo batteries from 1300 to 1800mah.

Optimized Fusion Design

The new all carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. The new carbon fiber main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminum tail case improving vibration damping and performance.

Aggressive and Attractive Trim Scheme

The Fusion 360 features a expertly painted fiberglass canopy and matching tail fin that is both attractive and purposeful. The bright color scheme is easy to see when tearing up the sky and is sure to catch the eye of everyone at the flight line.

Spektrum 6250HX Flybarless Controller

Cutting-edge Spektrum technology is featured throughout this beast from new Spektrum 3055 & 3065 servos with Optimized Servo Geometry to the new ground-breaking Spektrum 6250 HX flybarless system. This new flybarless controller features advanced adaptive flight control algorithms, forward programming, 6-axis M.E.M.S. inertial sensor, low-latency high-speed operation, two remote receiver ports for diversity, and a vibration rejecting aluminum lower case.

Key features

  • BNF Basic Convenience
  • 2221 - 1800Kv Brushless Outrunner Motor
  • Spektrum™ 6250 HX Flybarless Controller With Two Remote Receiver Ports
  • 6S Power System Provides Ballistic 3D Performance
  • Hobbywing 60A Platinum ESC With New IC3 Connector
  • Spektrum 3055 and 3065 Servos
  • Optimized Servo Geometry
  • Fiberglass Canopy and Painted Tail Fin
  • Carbon Fiber Landing Gear
  • Optimized and Lightened Main Frame
  • Forward Programming
  • CNC Main Blade Grips
  • Stunning Black Anodized Hardware
  • Large Tail Boom and New CNC Tail Case
  • High Visibility Fin and Trim Scheme
  • Improved Main Rotor Blade Design

Specifications

Approximate Assembly Time: No assembly required
Approximate Flight Time: 4 minutes
Battery: 6S 1300 - 1800mAh required
Canopy/Body Material: Fiberglass
Channels: Full range 6-channel DSM2/ DSMX transmitter required
Completion Level: Bind-N-Fly Basic
Flying Weight: 32.3oz (915g)
Height: 7.5" (190mm)
Length: 27" (685mm)
Main Blade Material: Carbon
Main Motor Type: Brushless Outrunner
Main Rotor Blade Length: 13.8" (350mm), Range: 13.8" - 14.2" (360mm)
Main Rotor Diameter: 31.3" (796mm)
Main Rotor Head Type: Collective pitch (CCPM) flybarless
Pinion Size: 11 tooth
Pinion Size (Range): 11 to 12 tooth
Servos: Swash Servos, Spektrum 3055 MG, Tail Servo, Spektrum 3065 MG
Skill Level: Level 3
Swashplate Type: 120 degree CCPM
Tail Drive: Belt Drive
Tail Ratio: 4.59:1
Tail Rotor Diameter: 6.9" (175mm)
Width: 3.5" (90mm)

Data sheet

  • Manufacturer : Blade
  • Level of difficulty (1 to 3) : 3
  • Type : Bind 'n Fly

What you need to complete

  • Full-range 6+ channel Spektrum™ 2.4GHz DSM2®/DSMX® Transmitter
    • Gen2 or iX12 required for Telemetry and Forward Programming Features
  • 22.2V 6S 1300-1800mAh 30C LiPo Flight Battery
  • Suitable LiPo Balancing Charger

Composition Kit

  • (1) Factory Assembled Blade Fusion 360 helicopter with:
    • (1) 350mm Carbon Fiber Main Rotor Blade
    • (2) 65mm Composite Plastic Tail Rotor Blades
    • (1) Spektrum 6250HX Flybarless Flight Controller
    • (1) Spektrum 4649T 2.4GHz DSMX® Receiver with Telemetry
    • (1) Brushless Outrunner Motor, 1800Kv
    • (1) Brushless 60A ESC
    • (3) Sub-Micro Digital Metal Geared Heli Cyclic Servos
    • (1) Sub-Micro Digital Metal Geared Heli MG Servo
  • (1) Product Manual
  • Everything expertly tuned by our team of pilots and developers!

Videos

Fusion 360 BNF Basic

579,99 €

Viewed products

MCM undertakes

Deliver within 24/48h

To send your order within 24h (on working days) (according to the limit of the available stock) & to deliver within 24/48h.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at + 32 2 376 24 05 (No. non-premium rate) from 10:00 to 18:30 or by email.

A few figures
  • A store of 400m² located south of Brussels.
  • 23 years of experience.
  • + 110 000 products ref.
  • + 35 500 products in stock.
  • + 240 distributed brands.

Secure paiments

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal CBC KBC ING Belfius Sofort PayPal Bankwire

All your paiements are 100% secured.

Shipping

MCM Pickup Bpost DPD Pickup DPD Predict DPD Saturday

Free DPD Pick-Up delivery from 99 eur

Our stores

  • MCM Racing - MCM Skyshop

     Space:
    Showroom 400M2
     Hours:
    10:00-18:30
     Creation date:
    Since 1996
     Phone:
    +32(0)2 376 2405
     

MCM Group, the R/C specialist since 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine