Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

G-Made

1/10 GS02 TS CHASSIS KIT

G-Made GS02 TS Chassis assembly kit

More details

G-Made

GMA57002

Out of stock Can not be ordered because not in stock at our supplier. Delivery time unknown

 Shippingcosts from 6.99€
or collect for free at the shop. .

240,99 €
*

Notify me when available

More info

Châssis GS02 1:10th scale

  • TTR transmission
  • Front weight balance
  • 4 wheel drive
  • CMS system
  • Rear shock hoop

STEEL LADDER FRAME
GS02 frame is designed to look as a chassis of a real car frame and the material of the frame is made of high strength steel, C-channel side rail and is with hex wrench bolted with cross members, which make it resistant to twisting or wraping.
Also, steel parts are black powder coated finish to prevent rust.

C-CHANNEL SIDE RAIL

ADJUSTABLE WHEELBASE
GS02 chassis allows three type of easy adjustment of wheelbase convert kit to use any type of 300,313 and 324mm custom bodies, (optional link kits are sold separately)

FRONT WEIGHT BALANCE
BOM's weight balance designed to be placed on the forward of the car.
This will increase the tire tracktion to the front wheel to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing the vehicle's rolling over when climbing.

CHASSIS MOUNTED SERVO SYSTEM with Panhard bar
BOM's steering system has a steering servo on the frame just like a 1:1 real car.
It is designed to make it as closed to the zero bump steer so bump steer movement does not
appear by front wheel suspension movements,
so we ended up with maximizing the steering performance of the vehicle.
In addition, the Panhard-bar is designed to avoid interference with nearby parts, so that the front suspension and shocks can move freely without any loss.

BATTERY TRAY
The battery can be easily replaced and can accommodate up to 7,600mAh 2-cell Lipo batteries or 5,000mAh 3-cell Lipo batteries. (7,600mAh 2-cell LiPo or 5,000mAh 3-cell LiPo)

DUST PROOF ELECTRONICS BOX
It protects electronic equipments such as winch controllers and BEC, which are often used for scale trucks, from foreign substances

FRONT AND REAR BUMPER MOUNT
mount to mount width: 43mm

SKID PLATE
The skid plate protects the transmission and other critical components by the flat surface that allows the BOM to slip and ride on rocks and other obstacles easily.

DRIVELINES
The drive lines of the front and rear axles are arranged in straight-line to reduce the fatigue stress of the universal shaft and reduce the loss of driving power by providing efficient driving lines.

TORQUE TWIST REDUCE TRANSMISSION
The TTR transmission is designed to drive in a stable position without pulling the balance of power transmitted to the axle.
The front and rear universal shafts based on the transmitter each rotates clockwise and counterclockwise, this compensates for the forces acting on the opposite rotational forces due to the action(torque) and reaction(reverse torque) because of that this vehicle can run in a super stable conditions.

DUAL SLIPPER CLUTCH
The slipper pads are designed to hold the spur gears evenly to allow more precise setting.

ALL METAL INTERNAL GEARS

HARDENED CARBON STEEL UNIVERSAL JOINTS
The front and rear universal shafts of the steel joints provides smooth and stable powertrain. The kit also includes the spare parts that allows you to adjust the length of the universal shaft.

EASY ADJUST MOTOR MOUNT
You can easily replace and install the motor pinion gear to changing the gear ratio.

GA44 AXLE
GA44 axle is designed with the hardcore rock crawler in mind.
Axles are made of high-strength meterials, and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
The GA44 axle housing is a durable one-piece type.
The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.

BODY POST
Adjustable body post is included to mount different shape bodies.

SD SCALER SHOCK ABSORBER
SD Scaler Shock is a Coil-over styled oil shock absorber optimized for the scale trucks.
The oil filled inside the shock minimizes splash when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive roughly on rough surfaces.
Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.

Data sheet

  • Manufacturer : G-Made
  • Scale : 1/10
  • Type : To build
  • Drive : Electric (Brushed)

1/10 GS02 TS CHASSIS KIT

240,99 €

Viewed products

MCM undertakes

Deliver within 24/48h

To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at + 32 2 376 24 05 (No. non-premium rate) from 10:00 to 18:30 or by email.

A few figures
  • A store of 400m² located south of Brussels open from tuesday till friday from 12.30 till 18.30 & saturday from 10.00 till 18.30.
  • 25 years of experience.
  • + 110 000 products ref.
  • + 35 500 products in stock.
  • + 240 distributed brands.

Secure payments

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal Scalapay ING Belfius Sofort Bankwire

All your payments are 100% secured.

Shipping

MCM Pickup GLS DPD Pickup DPD Predict DPD Saturday

Free DPD Pick-Up delivery from 149 eur*

Our stores

  • MCM Racing - MCM Skyshop

     Space:
    Showroom 400M2
     Creation date:
    Since 1996
     Phone:
    +32(0)2 376 2405
     

MCM Group, the R/C specialist since 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine