Platinum Pro 150A ESC V5 3-8s, 10 A BEC

Cooling structure

The two-sided structure of the circuit board has been re-designed to improve heat dissipation. The "open" design has allowed for better internal airflow circulation, resulting in a better cooling effect. Using thermal conductive tape and an additional heatsink would prolong the life and improves heat dissipation on the external capacitors. The thermal scale duct design has enhanced the cooling effect for the ESC to work cooler and more stable in the most extreme of conditions.

Note - the double-sided holow heat dissipation structure is patented.

VBar Telemetry Ready

The Platinum 150A V5 is equipped with Mikado VBar Control and is VBar Telemetry Ready able to monitor data of their electronics by its Fully Telemetry functions.

Smaller size, stronger flow resistance

The newly redesigned circuit has a more robust thermal structure in order for the Platinum 150A V5 to achieve a stronger flow resistance (150A/instant, 180A flow resistance). The smaller footprint design further improves the assembly process, resulting in the ESC from touching the head cover.

Superior fixed speed capabilities

The 32-bit processor combined with advanced algorithms from the Hobbywing engineers, are key to maximizing the full potential of the ESC. The fixed speed sensitivity is fully adjustable. This allows users to quickly find the suitable settings to suit their flying style, performing advanced aerobatic maneuvers and 3D flying at ease with precision.

High power BEC

The high power BEC is built-in and fully programmable. The ouput voltage is adjustable between 5.4-8.4V (0.1v step) and has a continuous output current of more than 10A. The instant output current has been increased to 30A and will provide and abundance of power consistently throughout the entire flight.

Added safety protection

It has multiple protection functions such as

• Start-up protection
• Current protection
• Temperature protection
• Overload protection
• Throttle signal loss protection
• Input voltage protection

Synchronous rectifier technology with multiple advantages

The ESC features optimized synchonous rectifier drives up efficiency (DEO - driving efficiency optimization, or active freewheeling), with multiple benefits:

• Faster throttle response
• Increased flight stability and flexibility
• Higher drive efficiency and longer battery life
• Lower temperature adjustment, more reliable

Additional features

Stand-alone parameter setting interface that expands a wide range of functions

• Connect the multi-function LCD setup box or OTA wireless module through the mobile phone for parameter setup with flight data recording function such as;
  • Minimum voltage
  • Maximum current
  • Maximum temperature date
  • Calibration speed
  • Speed curve table (helicopter storage fixed speed mode)
• Upgradable firmware (LCD parameter setup box or OTA module required)

Multiple braking modes added to fixed wing flights

There are four modes of braking in total (brake off, ordinary brake, proportional brake and reverse brake). In the brake mode, the brake strength can be adjusted. In the proportional brake mode, brake strength is automatically assigned through the throttle rocker position. In reverse brake, the remote control system is able to achieve and control forward and reverse.

• Brushless
• Regular voltage
• Continuous current 150A
• Peak current 180A
• Input voltage 3-8S LiPo
• BEC output: Switch mode, 5-8V, 10A
• Input wires 150mm
• Output wires 120mm
• Output connectors 4.0mm gold female
• Size 83x37x21mm
• Weight 140g