- More info
- Key features
- Specifications
- Data sheet
- What you need to complete
- Composition Kit
- Videos
- Accessories
More info
Setting the standard in the industry for years, the Losi® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car. With the popularity of No Prep Drag Racing exploding, Losi has once again taken it to the next level with a truly innovative design and the quality workmanship drivers expect. It has all the advantages of an aluminum chassis with plenty of 22s option parts, as well as being a pre-built roller. It's designed with racers in mind with Mickey Thompson branded large rear drag racing slicks and low drag, front tires. You get an all-metal gear transmission for concrete dependability and wire routes keeping your electronics and their wires in place and clean. The Elastomer battery mounting system is quick, easy and secure. Choose the electronics and body you want to run with and fly down the dragstrip in style.
The Foundation for Racing
The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included.
Mickey Thompson Ultra Light Front Runner Tires
Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics.
3mm Aluminum Chassis
The Drag Car Roller comes standard with the all new 3mm Aluminum chassis provides accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system.
Front Bumper with Adjustable Weight Placement
Fine tune the weight of the front end to keep it under control and on the ground.
Precise Adjustable Wheelie Bar
The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run.
Elastomer Battery Straps and Adjustable Battery Position
Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it.
Oil-filled Internal limited Coil-Over Spring Shocks
These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track.
Bleeder Shock Caps
Bleeder caps help you fine tune your shocks and get the perfect feel every time.
Fully Adjustable Turnbuckles
For added adjustability and tune-ability, adjustable turnbuckles come standard.
All Metal Gear Transmission
The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear!
Sealed Gear Differential - 500,000k Oil
The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want.
Key features
- Aluminum Chassis
- Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks
- All Metal Gear Transmission
- Clean wire router installation
- Precision Adjustable Wheelie Bar
- Elastomer battery mounting for a versatile battery hold down system
- Full line of Aluminum Option Parts Available
Specifications
Approximate Assembly Time | 1 - 3 hours |
Body | Not included |
Brakes | Integral with ESC |
Scale | 1/10 |
Front Track | 9.9" (252mm) |
Vehicle Size | Standard |
Product Width | 10.375" (264 mm) |
Radio | Sold Separately |
Charger | Sold Separately |
Receiver | Sold Separately |
Shock Type | Oil-filled internal limited coil-over spring |
Power Type | Electric |
Gear Pitch | 48P |
Servos | Sold Separately |
Vehicle Type | Drag Car |
Rear Track | 10.0" (256.5mm) |
Battery | Sold Separately |
Internal Gear Ratio | 2.43:1 |
Product Length | 24.5" (622 mm) |
Spur Gear | 84T |
Suspension | Lower A-Arm, Upper Link |
Ball Bearings | Full set |
Chassis | 3mm plate, 6061-T6 aluminum |
Completion Level | Roller |
Drivetrain | 2WD |
Drive Type | Forward/Brake/Reverse |
Product Height | 5" (127 mm) |
Speed Control | Sold Separately |
Wheelbase | 13.1" (333 mm |
Data sheet
- Manufacturer : Losi
- Level of difficulty (1 to 3) : 2
- Type de Kit : Kit à monter
- Scale : 1/10
- Type : To build
- Drive : Electric Brushless
What you need to complete
- (1) 2-Channel Transmitter and Receiver
- (1) 2-3S LiPo Battery
- (1) ESC
- (1) Motor And Pinion Gear
- (1) Compatible LiPo Charger
- (1) Steering Servo
- (1) Body And Paint
- (1 Set) Assorted Tools (See Manual For Details)
Composition Kit
- (1) Losi 1/10 22S 2WD No Prep Drag Car Roller
- (1) Product Manual
Videos
Accessories
SR315 DSMR 3 CH ReceiverSPMSR315 |
In stock at our store | 59,99 € | ||||
5000mAh 2S 7.4V 100C Smart LiPo Hardcase: IC5SPMX50002S100H5 |
To be ordered but unknown availability | 69,99 € | ||||
DISC.. Firma 100 Amp Brushless Smart ESC 3SSPMXSE1100 |
Last item in stock at our store | 109,99 € | ||||
5000mAh 2S 7.4V Smart G2 LiPo 50C Hard Case: IC5SPMX52S50H5 |
In stock at our store | 59,99 € | ||||
Firma 6500Kv Brushless MotorSPMXSM2800 |
To be ordered but unknown availability | 39,99 € |
DISC.. 22S No Prep Drag Roller: 1/10 2WD Drag Car
274,99 €
Viewed products
MCM undertakes
Deliver within 24/48h
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
MCM Crew
A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at +33 975184596 (No. non-premium rate) from 10:00 to 18:30 or by email.
A few figures
- A store of 400m² located south of Brussels open from tuesday till friday from 12.30 till 18.30 & saturday from 10.00 till 18.30.
- 25 years of experience.
- + 110 000 products ref.
- + 35 500 products in stock.
- + 240 distributed brands.