Robot Servo HSR-1425CR Continuous Rotation

The Hitec HSR-1425CR continuous rotation standard servo is a sovereign power, since it has a very large Dead band (dead band). So you can be sure that the engine stops when you command it. The position range for forward and backward movements is very large, resulting in a lot of speed resolution. The Hitec HSR-1425CR is equipped with a special motor, designed specifically for continuous rotation servos. Dual ball bearing on the drive shaft and the elastic nylon gears ensure long-life performance.

The HSR-1425CR is ideal for driving for various mechanical systems such. As the chain drive of an excavator.

• Width : 20 mm
• height : 37 mm
• length : 41 mm
• Weight : 0.042 Kg
• servo Type: Standard
• Features: Analog
• motor type servos: brushed
• Transmission: Nylon
• operating voltage in V: 4.8 to 6.0 V
• operating time s / 60 ° at 4 , 8 volts: 43
• actuating time s / 60 ° at 6.0 volts: 52
• torque in kgcm at 4.8 volts: 3
• torque in kgcm at 6.0 volts: 3
• teeth: 24T
• bearings: No
• Waterproof: No
• flight recommendation: No
• Recommendation Heli: No
• recommendation Car: Yes
• Recommended boat: No
• U / min: 43 @ 6.0V
• U / min: 52 @ 7.4V