Futaba

T18 MZ 2.4Hgz with receiver R7008SB (mode1)

Expert Expert

Futaba T18MZ radio system with R7008SB receiver. (Mode 1)

Meer details

Futaba

FUT1000200

Niet op voorraad Op bestelling maar niet op voorraad bij onze leverancier. Levertermijn onbekend.

 Verzendkosten vanaf 4.99€
of gratis afhaling in de winkel. .

2 489,99 €


Houd mij op de hoogte van beschikbaarheid

Meer informatie

It’s even more than the first Futaba 18-channel ever — it’s the only radio in the world manufactured with ground-breaking FASSTest™ technology!
The 18MZ is so revolutionary that it has the potential to change the way 2.4GHz systems are designed.
The potential offered by an 18-channel Futaba system is probably more than enough to make long-time fliers want to buy one. However, the 18MZ also offers the latest and best chapter in Futaba's 2.4GHz developments: new FASSTest technology.
While some information on the 18MZ and FASSTest is provided below, please be advised: it doesn't tell the full story on either topic. Quite the contrary: what you see are highlights; what we feel are the most meaningful, interesting (and solid!) facts available. There's much more to come on both in the future. However, what we can tell you is this:

About FASSTest Technology

  • It’s simultaneously the most advanced technology available and fully backwards-compatible with Futaba FASST™, FHSS & S-FHSS systems.
  • It’s bi-directional. In plain language, it’s capable of supporting telemetry functions.


About the 18MZ System

  • It’s the first true 18-channel Futaba radio system ever. It comes with an R7000SB receiver, as well as transmitter and receiver batteries.
  • The R7008SB is a high-voltage design that lets you use as many — or as few — channels as you want.
  • You can operate on up to 8 channels using the 8 standard PWM inputs. Servo options are wide open, ranging from simple analog to S.Bus and new S.Bus2 servos.
  • You have access to up to 18 channels (16 proportional + 2 digital) through the 18MZ’s two S.Bus2 ports. That means simpler, more foolproof setup and full support for S.Bus and S.Bus2 servos.
  • It features a SD Card slot. Slide a card in the slot, and you have ample (and adjustable) capacity for updates, model memory and more.
  •  It includes versatile “internal memory”. It’s not just for model/setup data; it can also be used for sound and picture files. That’s especially nice, since the 18MZ has…
  • A built-in 0.3M megapixel camera. No need for a digital camera or even a flip phone. Just point the 18MZ, click and you have a foolproof picture ID of your model in seconds.
  • It includes a 6” touch screen with 640x240 resolution. Big, brilliant and backlit for easy viewing anywhere, it provides sparkling clarity on remarkably little power. Gentle finger pressure is all that’s needed for fast, easy navigation and programming.
  • You can download software updates online. This is a standard feature for Futaba computer systems, and easily one of the most popular customer “perks.” It’s a fast and easy way to keep your system “current”.
  • A 7.4V, 3500mAh LiPo transmitter battery is standard equipment.
  • It features a built-in U.S.B. Port. You can use it to connect a memory stick or connect it to a keyboard or mouse or use it to download telemetry data to your PC or laptop for storage and reference.
  • It includes a Serial Interface, too. Futaba already offers a stand-alone serial interface (the CIU-2) for programming the travel, endpoint and other functions of S.Bus and S.Bus2 servos. This built-in (and the free download) lets you do the same with the 18MZ.
  • Stick angle adjusts quickly and easily. First introduced on the 14MZ, the adjustable gimbal angles feature has proven so popular that it was included on the 18MZ, as well. It’s more than a comfort/convenience feature; it allows you to customize your control setup for greater ease and precision.

Belangrijke kenmerken

Standard features

  • Channels: 16 proportional, 2 switched
  • Compatible with:
    • FASSTest, FASST and S-FHSS protocols
    • Futaba HV (High-Voltage) receivers
    • All Futaba telemetry sensors
  • Free online software upgrades
  • 92MB internal memory
  • Expandable model memory
  • 32-character user naming
  • 32-character model naming
  • Airplane, helicopter, glider and motor glider programming
  • 3 assignable rotary knobs
  • 4 assignable slider switches (2/side)
  • 5 assignable three-position switches
  • 2 assignable two-position switches
  • 1 assignable momentary two-position switch
  • Dual, high-speed processors
  • Earphone jack
  • 0.3 megapixel camera
  • Audio & Video players
  • Built-in microphone
  • Programming tools for S.Bus servos & gyros
  • Easy Link ID touch screen
  • Comfortable rubber grips on the sides and back
  • Stick calibration, plus tension and angle adjustments
  • Quad bearing gimbals
  • Quick model select
  • Servo monitor (neutral and moving tests)
  • 2 up/down timers
  • Integral timer system
  • Model timer
  • 4 vibration warning options (battery, condition, trim mix 1 & 2)
  • Programmable trainer system
  • Servo speed adjust
  • Trim mix
  • Programmable logic switches
  • User menu
  • Sub-trim (240 steps; channels 1-16)
  • Servo reversing (all channels)
  • Fail-Safe (all channels)
  • Battery fail-safe (all linear channels)
  • Endpoint Adjustment (all channels)
  • Trim (adjustable step, rate & mode)
  • Flight conditions
  • AFR
  • AFR curve mode (6)
  • AFR curve point number (15)


Airplane programming features

  • 8 flight conditions
  • 15 factory-programmed mixes
    •  Flap setting menu
    •  Differential ailerons
    • Aileron to camber flap mixing
    • Aileron to brake flap mixing
    • Aileron to rudder mixing
    • Airbrake to elevon Mixing
    • Rudder to ailevator mixing
    • Rudder to elevator mixing
    • Camber mixing
    • Elevator to camber mixing
    • Camber flap to elevator mixing
    •  Snap roll mixing
    • Airbrake mixing
    • V-Tail mixing
    • Motor mixing
    • Fuel mixture
    • Multi-Engine mixing
    • Gyro mixing
  • 10 programmable mixes
  • 13 wing types
    • Standard
      • a. 1 aileron
      • b. 2 aileron
      • c. 2 aileron + flap
      • d. 2 aileron + 2 flap
      • e. 2 aileron + 4 flap
      • f. 4 aileron + 2 flap
      • g. 4 aileron + 4 flap
    • Flying Wing
      • a. 2 aileron
      • b. 2 aileron + flap
      • c. 2 aileron + 2 flap
      • d. 2 aileron + 4 flap
      • e. 4 aileron + 2 flap
      • f. 4 aileron + 4 flap
  • 3 tail types (normal; V-Tail; ailevator)
  • plus throttle cut and idle down


Helicopter programming features

  • 8 flight conditions
  • 5 factory-programmed mixes
    • Swash mixing
    • Throttle mixing
    • Pitch to needle mixing
    • Pitch to rudder mixing
    • Fuel mixture
  • 10 programmable mixes
  • 8 swash plate types
    • Plus
    • Pitch/throttle curves (17-point)
    • Pitch/throttle curve modes (6)
    • Acceleration
    • Throttle hold
    • Gyro sense
    • Flybarless support
    • Governor
    • Condition hold
    • Hovering pitch
    • Hover throttle
    • High/low pitch
    • Swash AFR
    • Swash setting (mixing rate, plus linkage & speed compensation)
    • Swash ring
    • Throttle limiter
    • Idle down


Glider and Motor Glider programming features

  • 8 flight conditions
  • 12 factory-programmed mixes
    • Flap setting menu
    • Differential ailerons
    • Aileron to rudder mixing
    • Rudder to aileron mixing
    • Rudder to aileron mixing
    • Airbrake to elevator mixing
    • Camber mixing
    • Elevator to camber mixing
    •  Camber flap to elevator mixing
    • Butterfly mixing
    • Trim Mix 1 & 2
    • V-Tail mixing
    • Motor mixing
  • 10 programmable mixes
  • 13 wing types
    • Standard
      • a. 1 aileron
      • b. 2 aileron
      • c. 2 aileron + flap
      • d. 2 aileron + 2 flap
      • e. 2 aileron + 4 flap
      • f. 4 aileron + 2 flap
      • g. 4 aileron + 4 flap
    • Flying Wing
      • a. 2 aileron
      • b. 2 aileron + flap
      • c. 2 aileron + 2 flap
      • d. 2 aileron + 4 flap
      • e. 4 aileron + 2 flap
      • f. 4 aileron + 4 flap
  • 3 tail types (normal; V-Tail; ailevator)

Productgegevens

  • Fabrikant : Futaba
  • Moeilijkheidsgraad (1 tot 3) : 3

T18 MZ 2.4Hgz with receiver R7008SB (mode1)

2 489,99 €

MCM verbindt zich ertoe

Levering in 24/48u

Uw bestelling binnen de 24u te verzenden (op werkdagen) (en volgens de limiet van de beschikbare voorraad) & te leveren in 24/48u.

MCM Crew

Een team van specialisten helpen u in uw taal (Fr, Nl & En) van dinsdag tot zaterdag op het nr. + 32 2 376 24 05 (nr. zonder meerkost) van 10u tot 18u30 of per email.

Enkele cijfers
  • Een winkel van 400m² gevestigd ten zuiden van Brussel.
  • 23 jaar ervaring
  • + 110 000 productreferenties.
  • + 35 500 producten in voorraad.
  • + 240 verdeelde merken.

Veilige betalingen

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal CBC KBC ING Belfius Sofort PayPal Bank overschrijving

Al uw transacties zijn 100% beveiligd.

Levering

DPD Pickup Bpost DPD Pickup DPD Predict DPD Saturday

Gratis DPD Pick-Up levering vanaf 99€

Onze winkels

  • MCM Racing - MCM Skyshop

     Ruimte:
    Showroom 400M2
     Uren:
    10:00-18:30
     Creatie datum:
    Since 1996
     Telefoon:
    +32(0)2 376 2405
     

MCM Group, de R/C specialist sinds 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine