New product : Blade Inductrix FPV RTF & DX6e 6-Channel DSMX Transmitter

The perfect beginner FPV drone designed for indoor flying in even the smallest of places, the Blade® Inductrix® FPV drone is an ultra-micro marvel.

The DX6e gives you more than you ever thought possible from a 6-channel radio under $200. Four model types, 250-model memory, wireless trainer link – you get it all and more. You can even share model setups with users of other Spektrum transmitters.

FPV equipped

The Inductrix FPV is equipped with a 25mW video transmitter capable of transmitting on Fatshark channels 1 through 8 and all Raceband channels so you can race several pilots at once. You can select channels from the easy to use button atop the body of the Inductrix. The camera is very lightweight and perfectly protected in the body housing. The antenna we've chosen for video transmission is a dipole and designed with durability in mind. Video range of the Inductrix FPV is nearly 100 yards line of sight and more than adequate to fly in any large building or home.

High Performance Motors

The Inductrix FPV requires much more power to fly around with the added weight of the camera. It comes equipped with our high performance 14,300Kv motors!

Improved Flight Controller

We've tweaked the flight control system for better control in stability mode by allowing pitch to be applied even if the user demands even if throttle is full. Agility mode is now much more controllable too!

200 mAh Battery

Included is a large capacity 200 mAh battery so that you can fly upwards of 4 minutes.

4.3 inch FPV Monitor Included

The included FPV monitor is a 4.3" Spektrum SPMVM430 and is the perfect solution for FPV without having to pony up the cost of a full goggle system. The monitor is rechargeable via micro USB and has a 1.5hr run time before it needs to recharge. It is capable of receiving on 40 channels and can be clipped on to the MLP4 radio for hands free operation.

Optional Headset Adaptor

The best part about the included monitor is that you can upgrade it to the full headset with the SPMVM430HA headset adaptor. This gives you an inexpensive way to have the immersive experience of a full goggle.

LED Lighting

With brilliant white and red LED lighting illuminating each Inductrix FPV, it's easy to follow friends while flying together or even see if the battery is getting low when they begin to blink. The lights are mounted inside each frame so they too will be protected in a crash.

Quiet Ducted Fans

Each rotor is housed in a true duct and is extremely quiet during flight. The benefit of using ducted fans instead of propellers is they fully protect the fans in a crash and prevents the Inductrix from causing any damage to walls and is safe enough to be caught by hand!

Overview

Being on a budget doesn’t have to mean you have to settle for less than the best. The Spektrum DX6e gives you the unbeatable response of DSMX® technology, the simplicity of AirWare™ programming software and many other features you can’t find on other “budget” radios.

Airplane, Helicopter, Sailplane and Multirotor Programming
The DX6e comes equipped with the programming you need to fly almost anything. And because it’s based on the same AirWare software used in most other Spektrum transmitters, you can share model setups with just about any Spektrum user you meet.

AIRPLANE, HELICOPTER, SAILPLANE, MULTIROTOR PROGRAMMING

250-Model Memory
The enormous capacity of the DX6e’s on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easy to navigate too. Only memory slots with model settings saved to them will appear. You won't have to scroll through empty slots or move models around if one is deleted.

Built-In Telemetry
The built-in telemetry feature can give you real-time information on things like battery voltage, signal quality, motor temperature and more.* You can also program alerts that let you know when specific telemetry values reach or exceed limits you define.

*Requires telemetry sensors and a telemetry-enabled receiver.

Wireless Trainer Link
The wireless trainer link gives instructors the option to wirelessly ''buddy box'' with another DSMX/DSM2® transmitter. Once bound to another transmitter, ModelMatch™ technology will allow the DX6e to re-link without having to go through the bind process again.

Patent-Pending Gimbal Design with Spring Configuration Switch
The DX6e’s patent-pending gimbal design lets you change gimbal spring configurations simply by moving a slider switch on the back of the transmitter. No tools are required. Just select the spring configuration that matches the mode you are using and model type you are flying. That’s it.