WP 60A FWD/REV Brushed ESC

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.

* While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.

• Waterproof for all weather operation *
• LiPo and NiMH compatible
• Program functions changed with the use of jumper pins
• Up to an 8T motor limit
• Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles
• Crawler running mode
• Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation

• Forward:Yes
• Reverse:Yes
• Brake:Yes
• Time Delay Brake:Yes
• Continuous Maximum Current:FWD: 60A REV: 30A
• Input Voltage:2-3S Lipo, 5-9 cells NiMH/NiCd
• Input Connector Types:EC3
• Output Connector Types:3.5mm Tamiya style bullet
• Motor Limit:2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
• Momentary Peak Current:FWD: 360A REV: 180A
• Length:1.48 in (37.5mm)
• Width:1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
• Height:0.71 in (18mm)
• Weight:1.41 oz (40g)
• BEC Voltage:5V
• PWM Frequency:1KHz
• Overload Protection:Yes
• Full On Resistance:.0008 ohms
• Wire Gauge:16AWG
• Auto Cutoff:Yes