DISC.. FPV 220 Crossking Sport racer PNP kit

The new Beez2b quadracers FPV 220 Crossking are available as BNF kit (You just add your transmitter), as PNP Kit (You add your transmitter, your receiver and your battery pack) and as Frame Kit (You can choose all the motor/electronics equipments). They are also available in two versions : The Sport Racer is perfect for FPV racing beginnersn with a glass fiber and plastic frame and a LiPo 3S powered motor system. The Competition Racer is for experimented FPV racing pilots, with a carbon fiber and plastic frame, and a very powerful LiPo 4S powered motor system.

The Sport Racer PNP kit features a fiberglass and plastic frame, factory assembled, and with 2204-Kv2300 brushless motors, the 4 Rotor Sense & OneShot125 20A ESCs (3-4S), the 3 in 1 electronic board (flight controller, power distribution circuit and LED controller), a 640x480 PFV camera and a 25 mW 5.8 GHz video transmitter intalled. You just have to add your favorite transmitter and receiver (with PPM, S-Bus or Spektrum satellite output) and your battery, and you can enter the race.

• Diagonal distance between motor axles : 230 mm
• Total length without props (Frame) : 193 mm
• Total length with props (overall) : 284 mm
• Total width without props (Frame) : 210 mm
• Total width with props (overall) : 298 mm
• Total height without/with Vtx antenna : 39/119 mm
• Flying weight (With 3S 1800 mAh lipo battery) : 545 g

Motor system

• Motors : 2204-Kv2300
• ESC : 4 x brushless 20A ESCs with Rotor SENSE et OneShot125
• Battery : 3S 11.1V 1800 mAh LiPo battery
• Props  : 3-Blade 5"
• Flight controller : "F3" 3 in 1 electronic board (Flight controller, LED controller, Power distribution)
• Charger : E302 for LiPo, LiFe ou NiMH

FPV equipment

• 640 x 480  FPV camera, operating voltage 3.6-5V, working current 100 mA, Lens 2.5 mm, weight 3.2 grams.
  
  
• 40 channels 5.8 GHz vTx

• 6-CH+ transmitter
• 6-CH+ serial receiver (with PPM, S-BUS ou Spektrum satellite output)
• 3S 11.1 V 1800 mAh 25C LiPo battery with XT60 connector
• LiPo charger
• Charge cable with XT60 connector
• FPV headset or monitor with 5.8 GHz receiver.

• Pre-assembled FPV-220 Crossking Sport Racer (Glass fiber and plastic main frame) with :
  • 2 x CW 2204-Kv3200 motors
  • 2 x CCW 2204-Kv3200 motors
  • 4 x 20A ESCs with Rotor Sense and OneShot125 for 3-4S LiPo
  • 1 x 3 in 1 electronic boad (Flight controller, LED controller, Power Distribution Circuit)
  • 1 x 40 channels 5.8 GHz vidéo transmitter
  • 1 x 640 x 480 FPV camera
• 3-Blade 5" prop set (2 CW & 2 CCW)
• Video transmitter antenna
• Double sided adhesive foam
• USB cable
• Carry case