750mm F4U Corsair Warbird PNP kit - Yellow

Ready to fly out of the box

The RC airplane comes almost ready to fly out of the box and is assembled and ready to fly in just a few steps. The motor, the 4 servos and the ESC are already installed. You only need a suitable battery and a receiver to get your F4U Corsair in the air.

Powerful power system

The F4U Corsair is powered by a powerful 1300KV brushless motor with a 20A ESC. In combination with a 2S LiPo battery, the warbird has enough power for spectacular flight maneuvers.

Sturdy construction

The ready-painted airframe is built in a durable EPO hard foam. The material is extremely robust and can be quickly and easily repaired with a suitable superglue in case of slight damage.

Stable landing gear

The RC Warbird has a rigid and stable landing gear with rubber tires, which forgives even rough landings. So takeoffs and landings on flat surfaces are no problem. In uneven terrain, hand launches are also possible without further ado (but please with extreme caution). Due to the low weight, however, an extremely short runway is also sufficient.

Like a big one

The Derbee F4U Corsair is very compact with 75cm wingspan, but is in no way inferior to the original in terms of scale details. Whether dummy engine, weapons, rivets or landing gear - in the air the model looks like a real one.

By the way: The F4U Corsair is part of the Mini Warbird series from Derbee. In addition to the F4U Corsair, a A-1 Skyraider and a P-51 Mustang are currently available in the same scale and in different colors.

• Durable and light EPO hard foam construction
• Assembled and ready to fly in just a few steps
• Powerful 1300KV brushless motor and 20A ESC installed
• 4 x 9g servos installed
• Numerous scale details like rivets, weapons, dummy engine, etc.
• Ready painted and pasted
• Painted pilot figure installed
• Stable landing gear
• Removable cowl
• 3-blade propeller 8x6" included

• Wingspan: 750 mm
• Length: 610 mm
• Flight weight: ~ 420 g
• Motor: DERBEE Brushless DST-1300
• RESC: DERBEE Brushless 20A (With BEC)
• Servos: 4 x 9g
• JST (BEC) Battery connector

• 6+ Channels transmitter
• 6+ Channels receiver
• Battery : 2S LiPo 1000mAh 7,4V 35C
• LiPo charger
• Suitable CA Glue