The Blade® 500 X BNF combines BeastX™ flybarless technology with Bind-N-Fly® convenience to bring advanced pilots a big, powerful 3D heli they can have flying in the time it takes to charge a battery
More info
The Blade® 500 X BNF combines BeastX™ flybarless technology with Bind-N-Fly® convenience to bring advanced pilots a big, powerful 3D heli they can have flying in the time it takes to charge a battery. It comes out of the box assembled and equipped for aggressive 3D with an E-flite® 520H 1320Kv brushless motor and high-output 6S 30C Li-Po battery. This awesome power is complemented by the kind of state-of-the-art electronics and engineering you would expect to find in more expensive kits that take hours to build. You simply charge the battery, install the main blades, bind the receiver and fly.
AR7200BX Flybarless Control
Going flybarless is a great way to unleash the animal in any 3D helicopter. By eliminating the mechanical complexity and weight of a flybar, you can achieve faster head speeds and lighter disc loading. This translates into a helicopter that’s much more eager to perform aggressive 3D maneuvers. The BeastX™ 3-axis MEMS flybarless stabilization system is the most powerful flybarless technology available for high-performance 3D helicopters. Its unrivaled responsiveness and precision completely transforms any 3D flying experience.
The Blade 500 X brings you all the benefits of BeastX technology through the amazing Spektrum™ AR7200BX flybarless control system. This groundbreaking innovation combines a 7-channel DSMX® receiver with the BeastX system into a single, compact unit that weighs barely over ½ an ounce. Perhaps best of all is how simple the AR7200BX is to set up. Because BeastX flybarless technology doesn’t require a special interface to make adjustments, you can easily tune your heli’s response at the field using just the AR7200BX unit and a DSM2/DSMX computer transmitter with heli programming.
AR7200BX Flybarless Control
Going flybarless is a great way to unleash the animal in any 3D helicopter. By eliminating the mechanical complexity and weight of a flybar, you can achieve faster head speeds and lighter disc loading. This translates into a helicopter that’s much more eager to perform aggressive 3D maneuvers. The BeastX™ 3-axis MEMS flybarless stabilization system is the most powerful flybarless technology available for high-performance 3D helicopters. Its unrivaled responsiveness and precision completely transforms any 3D flying experience.
The Blade 500 X brings you all the benefits of BeastX technology through the amazing Spektrum™ AR7200BX flybarless control system. This groundbreaking innovation combines a 7-channel DSMX® receiver with the BeastX system into a single, compact unit that weighs barely over ½ an ounce. Perhaps best of all is how simple the AR7200BX is to set up. Because BeastX flybarless technology doesn’t require a special interface to make adjustments, you can easily tune your heli’s response at the field using just the AR7200BX unit and a DSM2/DSMX computer transmitter with heli programming.
Key features
Spektrum™ AR7200BX DSMX® Receiver with Integrated BeastX™ Flybarless Technology
425mm Carbon Fiber Main Blades
Single-Piece, Carbon Side Frames
CNC Machined Aluminum Head Block
CNC Machined Aluminum Swash Plate
Triple Ball Bearing Supported Hardened Steel Main Shaft
Spektrum S300 Digital Servos with S400G digital tail servo
E-flite® 520H 1320Kv Brushless Motor
E-flite® 6S 22.2V 2900mAh 30C Li-Po Battery
E-flite® 70A S-BEC Speed Control
Aluminum Tail Boom
Belt-Driven Tail Rotor with Thrust Bearings in the Grips
Weighted Tail Blade Hardware
425mm Carbon Fiber Main Blades
Single-Piece, Carbon Side Frames
CNC Machined Aluminum Head Block
CNC Machined Aluminum Swash Plate
Triple Ball Bearing Supported Hardened Steel Main Shaft
Spektrum S300 Digital Servos with S400G digital tail servo
E-flite® 520H 1320Kv Brushless Motor
E-flite® 6S 22.2V 2900mAh 30C Li-Po Battery
E-flite® 70A S-BEC Speed Control
Aluminum Tail Boom
Belt-Driven Tail Rotor with Thrust Bearings in the Grips
Weighted Tail Blade Hardware
Specifications
Experience Level: Advanced
Rotor Type: Collective Pitch Single Rotor
Size/Scale: 500
Completion Level: Bind-N-Fly
Recommended Environment: Outdoor
Assembly Time: 1-3 Hours
Main Rotor Diameter: 38.2 in (893mm)
Main Rotor Blade Length: 425mm
Main Blade Material: Carbon fiber
Tail Rotor Diameter: 7.8 in (198mm)
Battery: 22.2V 6S 2900mAh 30C Li-Po (included)
Speed Control: 70-Amp
Pinion Size: 13 tooth
Main Gear Ratio: 9.6:1
Tail Ratio: 0.00074838
Tail Drive: Belt drive
Length: 33.5 in (850mm)
Width: 6.1 in (156mm)
Height: 11.8 in (300mm)
Flying Weight: 3.88 lb (1.76 kg)
Approximate Flight Time: 4 minutes
Number of Channels: 6
Is Assembly Required: No
Swashplate Type: 120-degree CCPM
Rotor Type: Collective Pitch Single Rotor
Size/Scale: 500
Completion Level: Bind-N-Fly
Recommended Environment: Outdoor
Assembly Time: 1-3 Hours
Main Rotor Diameter: 38.2 in (893mm)
Main Rotor Blade Length: 425mm
Main Blade Material: Carbon fiber
Tail Rotor Diameter: 7.8 in (198mm)
Battery: 22.2V 6S 2900mAh 30C Li-Po (included)
Speed Control: 70-Amp
Pinion Size: 13 tooth
Main Gear Ratio: 9.6:1
Tail Ratio: 0.00074838
Tail Drive: Belt drive
Length: 33.5 in (850mm)
Width: 6.1 in (156mm)
Height: 11.8 in (300mm)
Flying Weight: 3.88 lb (1.76 kg)
Approximate Flight Time: 4 minutes
Number of Channels: 6
Is Assembly Required: No
Swashplate Type: 120-degree CCPM
Data sheet
- Manufacturer : Blade
- Level of difficulty (1 to 3) : 3
What you need to complete
6+ channel DSM2- or DSMX-compatible computer transmitter with helicopter programming
Videos
Spare parts for DISC.. Helicopter 500 X BNF kit
DISC.. Main Blade Holder: B500 3D/XBLH1801 |
Last item in stock at our store | 8,99 € |
DISC.. Helicopter 500 X BNF kit
0,00 €
Viewed products
MCM undertakes
Deliver within 24/48h
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
MCM Crew
A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at +33 975184596 (No. non-premium rate) from 10:00 to 18:30 or by email.
A few figures
- A store of 400m² located south of Brussels open from tuesday till friday from 12.30 till 18.30 & saturday from 10.00 till 18.30.
- 25 years of experience.
- + 110 000 products ref.
- + 35 500 products in stock.
- + 240 distributed brands.