DISC.. MAMBA MONSTER 2 1:8TH 25V ESC WATERPROOF WITH 2650kv motor

It’s time to meet Monster 2, he’s just as mean as his older brother but he likes to get wet. That’s right; the Mamba Monster 2 ESC is now potted by the good people at Castle in Kansas City. Users can run their vehicles through the morning dew, down the muddy road, across the soggy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck.

Mamba Monster 2 is intended for on-road, buggies, truggies and monster trucks running up to 6S LiPo and tipping the scales at up to 15lbs. The innovative new case allows for fan changes, if necessary. Solder posts now permit users to change battery wire length and direction as needed.

As always, the Mamba Monster 2 offers industry-leading software functions and USB programming capability via Castle Link USB adapter (free with included coupon). Remember, the fan is not water proof, so users need to remove the fan before they head out into wet conditions.


Legal mumbo jumbo that we need you to read:
Although Monster 2 and Castle brushless motors are waterproof, they can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

Input voltage MIN: 2s LiPo; MAX: 6s LiPo
Max continuous amperage 120A (full throttle continuous operation with cooling airflow)
BEC specifications User selectable output between 5 and 7 volts
Operating environment Waterproof* design allows for use in nearly any environment.
Brake Proportional
Reversible Yes - with lockout
Size L: 1.86" (47mm)
W: 2.19" 56mm)
H: 1.33" (34mm)
Weight (without battery connector soldered to ESC) 3.93 oz
111.5 g
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Fan is not water resistant. Remove fan from ESC before exposing vehicle to liquids.