Servo HSR-2645CR Continuous Rotation

We have developed the digital HSR-2645CR based on the proven Hitec HSR-1425CR Robotics (continuously rotating servo). This non-proportional, continuously rotating servo impresses with a work area from 4.8 to 8.4 volts and a lot of torque. The HSR-2645CR has preset a very large dead zone. So you can be sure to be a clear distinction between the left turn, stop and turn right. If, with a suitable programming device, for example, HFP 30 Totzzone to a smaller value, as is the control range which is very large, which gives a fine speed control for left and right movements. The Furthermore, the HiTEC HSR-2645CR is equipped with a special motor which is specifically designed for continuous rotation servo.

The Hitec HSR-2645CR is ideal for driving various mechanical systems, such. B. robotics or the driving of a model vehicle.

Revolutions per minute:
46 U / min at 4.8 volts
58 U / min at 6.0 Volt 
73 U / min at 7.4 volts

• Width : 20 mm
• height : 38 mm
• length : 41 mm
• Weight : 0.053 Kg
• servo Type: Standard
• Features: Analog
• motor type servos: brushed
• Transmission: metal
• operating voltage in V: 4.8 to 8.4 V
• operating time s / 60 ° at 6 , 0 volts: 58
• actuating time s / 60 ° at 7.4 volts: 72
• torque in kgcm at 4.8 volts: 8
• torque in kgcm at 6.0 volts: 10
• torque in kgcm at 7.4 volts: 12
• teeth: 24T
• bearings: Yes
• Waterproof: No
• Flight Holiday No
• recommendation Heli: No
• recommendation Car: Yes
• Recommended boat: Yes
• U / min: 58 @ 6.0V
• U / min: 72 @ 7.4V