- Meer informatie
- Belangrijke kenmerken
- Specificaties
- Productgegevens
- Wat nodig is om te vervolledigen
Meer informatie
The XCub from DERBEE is a true-to-life RC motorized aircraft with a wingspan of 150 cm. The model has excellent STOL characteristics and can take off and land on any terrain thanks to its large rubber tires. A highlight is the pre-installed tow hook.
Ready to fly out of the box
The XCub from DERBEE comes almost ready to fly out of the box and can be assembled in just a few simple steps. The motor, controller, and seven servos for the landing flaps, ailerons, rudder, elevator, and tow hook are already installed. All you need is a suitable 3S or 4S LiPo battery and a receiver to get the XCub airborne in no time.
STOL characteristics
The XCub is the perfect STOL aircraft. Thanks to its large landing flaps and stable landing gear, the model aircraft is ideal for taking off and landing on extremely small and short surfaces. The large balloon tires allow the XCub to take off and land effortlessly even on uneven terrain.
Powerful drive
The XCub is powered by a powerful 900KV brushless outrunner motor with a 40A flight controller. In combination with a 3S or 4S LiPo battery, the STOL aircraft has enough power for spectacular flight maneuvers.
Robust construction
The finished, painted model aircraft is constructed using a sturdy EPO hard foam design. The material is extremely robust and any minor damage can be quickly and easily repaired using a suitable superglue. The landing gear is made of metal.
Belangrijke kenmerken
- Stable and lightweight EPO hard foam construction
- Ready to fly in just a few simple steps
- Powerful 900KV brushless motor and 40A ESC installed
- 7 servos already installed
- Extra-large landing flaps for excellent slow flight and STOL characteristics
- Pre-installed tow hook
- Pre-painted and decaled
- Sturdy metal landing gear with large rubber balloon tires
- Removable cowling
- Includes 2-blade propeller 11 x 7"
Specificaties
- Wingspan: 1500 mm
- Length: 983 mm
- Flying Weight: ca. 1500 g
- Motor: DERBEE Brushless 3720-900KV
- ESC: DERBEE Brushless 40A (XT-60)
- Servos: 3 x 9g MG, 2 x 9g PG, 2 x 17g PG
Productgegevens
- Fabrikant : Derbee
- Moeilijkheidsgraad (1 tot 3) : 1
- Materie : EPP / EPO schuim
- Kits : Trainers
- Type : Ready to Run Basic
- Aandrijving : Electrisch Brushless
Wat nodig is om te vervolledigen
- 6CH+ Transmitter
- 6CH+ Receiver
- 3S or 4S 2200 mAh 35C LiPo Battery (XT60)
- LiPo Charger
Plane 1500mm : XCub "STOL" PNP Kit
299,00 €
Bekeken producten
MCM verbindt zich ertoe
Verwerking binnen 24 werkuren
Uw bestelling binnen de 24u te verzenden (op werkdagen) (en volgens de limiet van de beschikbare voorraad) & en snel geleverd.
MCM Crew
Een team van specialisten helpen u in uw taal (Fr, Nl & En) op het nr. + 32 2 376 24 05 (nr. zonder meerkost) van dinsdag tot donderdag van 12u30 tot 18u00 en vrijdag tot zaterdag van 10u tot 18u30 of per email.
Enkele cijfers
- Een winkel van 400m² gevestigd ten zuiden van Brussel.
- 28 jaar ervaring
- + 110 000 productreferenties.
- + 35 500 producten in voorraad.
- + 240 verdeelde merken.
Voorraadpictogrammen bijschrift
-
Op voorraad in onze winkel
-
Laatste artikel voorraad in onze winkel
-
Op voorraad bij onze leverancier
-
Beperkte voorraad bij onze leverancier
-
Op bestelling maar beschikbaarheid bij de leverancier niet gekend
-
Op bestelling maar niet op voorraad bij onze leverancier
-
Nieuwigheid in "voor"bestelling
-
Artikel niet meer leverbaar