Xerun ESC XR10 Pro V4 160A BEC 4A 2-3s Black for 1/10

High Power Output

Continuous current of 160A and peak current of up to 1200A guarantees a stable and high power output during competitions.


Special Design for Top Racing

Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles) creates an ideal power solution to 1/10th scale top touring car, Pan car and buggy racing.


Programming / Upgrading /Data reading wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.


Adjustable Throttle & Brake PWM Frequencies

Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).


Efficient Heat Dissipating System

The aluminum casing and reticular heat sink combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly  ransferred to the heat sink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.


High current/voltage BEC

The built-in switch mode BEC with a maximum output of 8A and voltage adjustable between 6V and 7.4V allows the user to use various high voltage servos.


Separate Programming/Fan Port

The separate PRG/FAN port on the ESC can power an external fan to maximize cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.


Advanced and Secure Electronic Switch

The XR10 Pro ESC features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.


Innovative data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows the user to analyze the recorded data via a the LCD program box or WiFi module after each use.

• Scale : 1/10
• Motors type : Brushless
• Waterproof : No
• Max cont. current : 160 A
• Max burst current : 1200 A
• Input : LiPo 2-3S / NiMH 4-9 elts
• BEC : Switch mode, 6-7.4V, 4A
• Fan : Size 25 x 25 x 10 mm, powered by BEC : BEC 5-7,4V
• Programming via :
  • SET button on ESC : No
  • LEC program box : No
  • LCD program box : Yes
  • WiFi Module: Yes
  • Program port : Separate Program Port
• Firmware : Supported
• Dimensions : 37.5 x 30.9 x 31.6 mm
• Weight : 95 g
• Applications : Sensored and unsensored BL motors, 1/10^thTouring Car/Buggy/Top Racing, 1/10^thDrift Car/F1, 1/10^th & 1/8^thCrawler
• Limits : 2S LiPo/6S NiMH: (Touring Car) T≥3.5T, (Buggy) T≥4.5T.  3S LiPo/9S NiMH: (Touring Car) T≥6.5T, (Buggy) T≥8.5T.