V14 MAX OLED 2,4GHz ELRS LBT Radio (Multimode - M2) - Black/Jaune

The HelloRadio V14 MAX remote control combines cutting-edge technology with sophisticated design, giving you complete control. Equipped with the open-source EdgeTX system and an LED touchscreen, it opens up entirely new possibilities. Intelligent safety features, flexible module compatibility, and precise motion control ensure you maintain complete control at all times.

Open-Source System EdgeTX

The V14 MAX comes pre-installed with the EdgeTX open-source firmware. EdgeTX is an open-source firmware for remote control transmitters used in RC applications such as model airplanes, drones, model ships, and model vehicles. It is highly customizable and allows users to configure their transmitters and adjust the settings to their individual preferences and specific needs.
EdgeTX supports a wide variety of RC protocols, making it a popular choice in the RC community. Its flexible and powerful features make it a versatile tool for advanced users looking to take their RC activities to the next level.

ELRS Radio System

The V14 MAX is offered with an internal ELRS RF module. ExpressLRS (ELRS) is an open-source radio system that offers high update rates and low latency. It is ideal for all RC applications where fast response times are critical.

T-Antenna

The newly developed and patented T-antenna ensures excellent signal quality and increased range. The foldable T-antenna also serves as a carrying handle.

AI Voice Assistants

The V14 MAX is equipped with AI voice recognition, which offers a unique interaction experience with the transmitter through personalized voice inputs, supported by the EdgeTX software.

Intelligent Safety Features

The V14 MAX is equipped with three high-precision voltage and current sensor measuring units with a measurement accuracy of 0.2%. This allows the system's operating status to be monitored in real time, as well as the working status of the transmitter battery, the main control system, the built-in radio frequency module, and the external radio frequency module. If the system detects abnormal current and voltage signals, it automatically protects the system and the radio frequency modules and issues warnings. It prevents damage caused by moisture, short circuits, overvoltage, and overcurrent, and prevents flight accidents in advance.

Motion Control

The V14 MAX is equipped with 3-axis acceleration and 3-axis gyroscope sensors. This allows control functions to be controlled by moving the transmitter—i.e., changing its position. The motion control function is activated via the AI ​​voice assistant and deactivated again by moving the gimbal.

Programmable Gimbal

LED The two LED rings consist of 16 colored LEDs. The flashing mode and colors of the gimbal LEDs can be adjusted using a simple selection program. Switches can then be used to switch between different modes.

HG01 CNC Gimbal

The HG01 gimbal units are fully CNC-machined and mounted on four ball bearings for maximum precision. The preload and travel adjustments are accessible from the front, allowing for easy fine-tuning. The HG01 control units are equipped with a Hall sensor.

V14 versions table

• EdgeTX open-source system
• AI voice assistant and voice control (say "Hello Radio" to activate the voice assistant)
• Equipped with three voltage and current measuring units with an accuracy of +/-0.2%, which can independently measure the voltage of a single battery cell of the transmitter and monitor the charging voltage and current in real time
• Motion control for controlling functions by moving the transmitter
• Programmable gimbal LED consisting of 16 colored LEDs
• CNC-milled and four-ball bearing stick units for highest precision
• 2.4-inch OLED display
• Foldable T-antenna for excellent signal quality and increased range
• Multimode control arrangement – ​​selection between Mode 1, 2, 3, or 4
• Mode switches 1 to 6 can be defined as desired
• Internal ELRS RF module
• Compatible with external modules with a Micro-JR slot
• Dual serial hardware port for communication with the external RF module
• Reverse control circuit for supporting multiple types of external RF modules
• Charging circuit stops charging Automatically when an overvoltage is detected in the battery cells
• Protection circuit to prevent damage from reversed power connection
• USB-C port for connecting to a PC
• 3.5mm jack for connecting a teacher/student cable
• 3.5mm jack for connecting headphones
• USB-C port for connecting a charging cable
• SD card slot with 512MB Micro SD card

• Dimensions: 182 x 132 x 54 mm
• Weight: 540 g (without battery)
• Transmission frequency: 2.400 GHz-2.480 GHz
• Internal RF options: ExpressLRS
• Transmission power: LBT max. 100 mW
• Supported protocols: Module dependent
• Operating current: 260 mA
• Operating voltage: 6.6-8.4 V DC
• Radio firmware: EdgeTX
• Channels: 14 channels
• Display: OLED
• Sensors: Hall
• Module bay: Compatible with the following micro JR modules: Multi-protocol modules, Ex-pressLRS, Ghost, TBS Crossfire, TBS Tracer, etc.
• Update method: Supports USB-C for online updates / SD card for offline updates
• Battery bay: Standard 18650 batteries (2 batteries) or HelloRadio TX battery pack

• 1x V14 MAX
• 1x Carrying Case
• 1x Gimble Protector
• 1x Hand Grip
• 1x Transmitter Strap
• 1x USB-C Cable
• 1x 1.5 mm Allen Wrench
• 1x 18650 Battery Case
• 1x Screen Protector
• 4x Low-Tension Springs
• 1x Quick Start Guide
• 1x Sticker