60-Amp Pro Switch-Mode BEC Brushless ESC (V2)

Maximize

Electronics Brushless Speed controller Electronics & Motors

60-Amp Pro Switch-Mode BEC Brushless ESC (V2)

E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2)

More details

Manufacturer: E-Flite

Reference: EFLA1060B

Stock status: Can not be ordered because availability unknown from the supplier. New delivery in 7 to 10 days.

Shippingcosts from 6.99€
or collect for free at the shop. .

MCM Price : 109,99 €

Notify me when available

More info
Key features
Specifications
Data sheet

More info

The E-flite® 60-Amp Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key features

Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)
5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)
Stronger BEC for support of most 3-axis stabilization systems
Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
Finned heat sinks
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
Programmable soft start for helis and airplanes
Auto motor shut down if signal is lost or there is interference
Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
Utilizes new smaller MOSFET technology to minimize weight
Radio system power on/off switch
Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Specifications

Continuous Maximum Current:	60A
Input Connector Types:	13 AWG with E-flite® EC3™ connector
Output Connector Types:	13 AWG with 3.5mm gold bullet connectors
Momentary Peak Current:	15 sec @ 75A with proper cooling air flow
Length:	2.85 in (73.0mm)
Width:	1.30 in (33.0mm)
Height:	0.61 in (15.5mm)
Weight:	2.65 oz (75.0 g)
Cells w/BEC:	3–6S Li-Po or 9–18 Ni-MH/Ni-Cd

Data sheet

Manufacturer : E-Flite

30 other products in the same category:

60-Amp Pro Switch-Mode BEC Brushless ESC (V2)

109,99 €

Viewed products

60-Amp Pro Switch-Mode BEC Brushless ESC (V2)

MCM undertakes

Deliver within 24/48h

To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at +33 975184596 (No. non-premium rate) from 10:00 to 18:30 or by email.

A few figures

A store of 400m² located south of Brussels open from tuesday till friday from 12.30 till 18.30 & saturday from 10.00 till 18.30.
25 years of experience.
+ 110 000 products ref.
+ 35 500 products in stock.
+ 240 distributed brands.