Ghiant

RC Car Fluo Green 150ml


RC Car Colours from Ghiant : Ready to use, quick drying, fuel resitant light weight paint for racing, If wished for up-to 15 gr less weight on a 1/10 scale race body, compard to pre-painted or water based coloured bodies (lower cenre of gravity). Color : Fluo Green.

More details

Ghiant

GHIRCC1008

In stock In stock at our shop Shipment in 24/48h

 Shippingcosts from 4.99€
or collect for free at the shop. .

5,49 €

More info

Airbrush specifications

    Dilute with aceton

Applications

RC Car Colours have been specially developed for the painting of Polycarbonate bodies. The special solvent used etches the surface, allowing the paint to bond permanently with the polycarbonate.
Before you begin ... Remove any dirt particles from the surface to be painted


Polycarbonate bodies

Cut out the body and sand the cut edges. Many bodies have a transparent protective foil on the outside. Do not remove this protective foil until the paints has dried! Mask all areas that are not to be painted, by using masking film or masking tape. First paint the dark and then the light colours so as to prevent the dark colours from shining through the lighter ones. Always check to make sure that the surfaces are dry and free of dust before painting!
For best results

    Before use, shake the can vigorously for approx. 2 min. until you hear the mixing ball rattling.
    Spray at a distance of approx. 20 to 30 cm. While spraying make even cross movements with the can.
    The covering capacity of RC Car Colours varies slightly from one colour to the next. Always spray one very light coat at a time to avoid bleeding. The final result is obtained after 2 to 3 coats. Wait approx. 5 min. before applying the next coat. Never spray just one heavy coat!
    Allow the paint to dry for 5 minutes before removing the masking film and applying the next coat.
    After use, turn the can upside down and spray for 2 sec. until the nozzle is empty.

Special instructions for fluorescent colours

Fluorescent colours appear not to cover as well as normal colours. While spraying you must absolutely make sure to apply only very light coats. Always use at temperatures above 15°C. Spray from a distance of +/-15/20 cm. Allow the colour to dry for 30 min. and back the fluorescent colour with white RC Car Colour. Only then the desired fluorescent effect will be obtained!

Data sheet

  • Manufacturer : Ghiant

RC Car Fluo Green 150ml

5,49 €

Viewed products

MCM undertakes

Deliver within 24/48h

To send your order within 24h (on working days) (according to the limit of the available stock) & to deliver within 24/48h.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) from Tuesday till Saturday at + 32 2 376 24 05 (No. non-premium rate) from 10:00 to 18:30 or by email.

A few figures
  • A store of 400m² located south of Brussels.
  • 23 years of experience.
  • + 110 000 products ref.
  • + 35 500 products in stock.
  • + 240 distributed brands.

Secure paiments

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal CBC KBC ING Belfius Sofort PayPal Bankwire

All your paiements are 100% secured.

Shipping

MCM Pickup Bpost DPD Pickup DPD Predict DPD Saturday

Free DPD Pick-Up delivery from 99 eur

Our stores

  • MCM Racing - MCM Skyshop

     Space:
    Showroom 400M2
     Hours:
    10:00-18:30
     Creation date:
    Since 1996
     Phone:
    +32(0)2 376 2405
     

MCM Group, the R/C specialist since 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine